Runaway October

Recently I’ve come across a cou­ple arti­cles and tuto­ri­als on how to recy­cle yarn. At first I thought some­one was tak­ing it too far. I mean, wouldn’t that be a HUGE amount of work for a lit­tle bit of yarn? No. Think about how many skeins of yarn it takes to make a nor­mal sweater — 4, 8, 12? Depends on the sweater and the yarn but that’s a lot of money if you buy some­thing that isn’t ugly clearance-pile acrylic. Just a decent small wool skein is $5!

So I experimented.

[singlepic=222]

I bought two small hooded Good­will sweaters, cute as but­tons, but only big enough to fit one of my boobs in. Okay, more than that but just know­ing that some­one that petite existed made me want to destroy the sweaters. Kid­ding! They were 100% cot­ton and appeared to be Super Bulky. I did the seam check… Awe­some! The pan­els were shaped, not knit­ted in large blocks, cut and then serged together. That would mean that the yarn would be in lots of lit­tle pieces instead of one con­tin­u­ous strand. Had the sweaters been made out of an acrylic I wouldn’t have both­ered because acrylic is so much cheaper in the stores that it’s not worth the work.

[singlepic=223]

Basi­cally, all I had to do was sep­a­rate the sweater pieces — hood, sleeves, back, placket, etc and then unravel them. I used no fancy tools besides a seam rip­per, and just wound the yarn around my arm, like you would do with an exten­sion cord. It didn’t take me very long as once I had the sec­tions sep­a­rated I could wind the yarn while watch­ing TV with­out pay­ing atten­tion. It was def­i­nitely a good work­out for my “mama arms”! Because the sweaters were made of cot­ton yarn I washed them first as there was no risk of felt­ing, but now that it’s unrav­eled it’s kinky as shown by the pic­tures. So I’ll soak it in hot water and then hang it out to dry with a lit­tle bit of weight on it. The top pic­ture is on a full sized cof­fee table for an idea of how much yarn one sweater gave me. Oh, and both had about 8 really cute but­tons on them that I can reuse too.

[singlepic=224]

A few tidbits:

• Uncer­tain if it is wool or not? Soak it overnight in straight bleach. If it dis­solves then it is wool. If noth­ing changes then it is prob­a­bly acrylic.
• Angora is oh so soft and pretty in a com­pleted sweater but does not unravel well. Either does any­thing furry, eye­lashy or bumpy.
• Try not to cut any of the yarn while pulling out the seams. You’ll have to splice it back together.
• Make sue to label your fin­ished yarn so you remem­ber the fiber con­tent of your fin­ished prod­uct. Here are some PDF labels from MysticSpiral.com
• Don’t like the color but the yarn is won­der­ful? Dye it!
• Rethink lace-weight sweaters. If you’re doing every­thing by hand, you’ll never fin­ish unrav­el­ing. I know I didn’t.
• Watch out for but­ton holes. If they are on a sep­a­rate placket then just dis­card the placket. If the but­ton holes are cut and sewn into the body of the sweater that yarn will be cut and not con­tin­u­ous. Either splice the yarn back together, dis­card the button-holed sec­tion or look for a dif­fer­ent sweater. 

Here are a cou­ple tuto­ri­als if you are interested:

• www.neauveau.com/recycledyarn.html
• http://laughingpurplegoldfish.blogspot.com/2008/10/recycling-yarn-from-jumper.html
• http://dawnprickett.blogspot.com/2008/01/recycling-sweaters-for-yarn.html
• http://www.az.com/~andrade/knit/thrifty.html
• http://www.craftleftovers.com/blog/archives/401

Oh and if you have any wool or cot­ton sweaters lay­ing around that you don’t want and they aren’t serged I’d love to have them!